|
UNION 1 - 6in1 Mini Multipurpose Machine Short Description :
1.Can make up of : 1) Jigsaw 2) Grinder 3} Driller 4) Metal lathe 5)Wood lathe 6)Miller
2,Weight:: 4.5KG
2.Support power 14.5VDC 3. Motor speed: 20,000rpm
4.Can process integrated circuit,acrylics,wood,plastic,metal.eg,gold,silver,copper,steel,aluminum,and so on, 
Jigsaw：
Technique Data :
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Support power: 14.5VDC/2A/29W
4) Table size: 90 x 90mm
5) Stroke of the jigsaw: 4mm
6) Material: Carbon steel, Aluminum, ABS
7) Max. thickness of cut: hardwood: 4mm, polywood: 7mm, softwood: 18mm, sheet metal: 0.5mm, plexi-glass: 2mm
8) Maximum measurements on 3D (L/W/H cm): 15/10/14
9) Net weight: 0.72kg
10)It is specially designed that it is very safe when operating
Driller：
Technique Data:
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Motor input: 14.5VDC / 2000mA
4) Slide travel: 50 and 20 respectively
5) Stroke: 25mm
6) 8 collects from: 0.5 to 6 mm
7) Table size: 123 x 100mm
8) Working radius (distance between drill and machine bed): 71mm
9) Material: Carbon steel, Aluminum, ABS
10) Can process soft-aluminum, brass, copper, wood, plastics, other soft, colored and precious metals
11) Maximum measurements on 3D(cm L/W/H): 15/15/28
12) Net weight: 1.46kg
Grinder：
Technique Data:
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Motor input: 14.5VDC / 2000mA
4) Material: Carbon steel, Aluminum, ABS
5) Can sanding paper: diameter 49mm, grain 100
6) Can process everything that is used in model making
7) Maximum measurements on 3D(cm L/W/H): 28/5/10
8) Net weight: 0.75kg
Wood lathe：
Technique Data:
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Motor input: 14.5VDC / 2000mA
4) Max. Cutting diameter: 45mm(bigger diameter is possible with intermediatepiece)
5) Center distance: 135mm(with accessories extra long machine bed can longer to 360mm)
6) Material: Carbon steel, Aluminum, ABS
7) All types of wood (also hard wood) can be processed
8) Recommended types of wood: Lim wood, birch, maple, pear tree, cherry tree (medium hard), beech tree, oak (hard)
9) Every suitable chisel and gouge can be used
10) Maximum measurements on 3D(cm L/W/H): 28/10/10
11) Net weight: 1.28kg
Miller：
Technique Data:
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Motor input: 14.5VDC / 2000mA
4) Slide travel: 30 and 50mm
5) Collets from 0.5-6mm milling cutter
6) Vice capacity: 25 x 25mm
7) Material: Carbon steel, Aluminum, ABS
8) Can process hard wood strips (beech-tree, nut-tree), wooden bars (max. 20mm diameter)or plastic and soft metal.
9) Do not touch the turning tools, it is very dangerous
10) Maximum measurements on 3D(cm L/W/H): 28/18/15
11) Net weight: 1.45kg
Metal lathe：
 
Technique Data:
1) Motor speed: 20,000rpm
2) Headstock speed: 2,000rpm
3) Motor input: 14.5VDC / 2000mA
4) Tree 3-jaw chuck (self-centering)
5) Max. Cutting diameter: 20mm(bigger diameter is possible with intermediatepiece)
6) Center distance: 135mm(with accessories extra long machine bed can longer to 360mm)
7) Material: Carbon steel, Aluminum, ABS
8) Can process soft-aluminum, brass, copper, wood, plastics, other soft, colored and precious metals
9) Maximum measurements on 3D(cm L/W/H): 28/10/10
10) Net weight: 1.35kg
Off-hand tools：
FAQ :
1、Q: How many functions of UNION-1? Re: It can make up of: (1) jig saw (2) metal lathe (3) wood lathe (4) grinder (5) miller (6) driller.
2、Q: What kind of power supply does UNION-1 use? Re: D.C.14.5V 2A.
3、Q: What is the rotate speed of motor? Re: Amateurish is 12,000; and high-speed motor is 20,000.
4、Q: What kind of materials make up of UNION-1? Re: The base all use high-class alnico with ruggedization, the other crust adopt ABS engineering plastics, parts of collets adopt metal or coppery materials.
5、Q: Which falchion does UNION-1 use? Where can buy it? Re: Ecumenical normal falchion. You can buy it from our company or hardware shop in market directly.
6、Q: How long does the life-span? Re: The components are not expendable can be guaranteed one year, in common condition, it can not damaged in five years.
7、Q: Can it process metallic products? Re: All the metallic products can be processed, such as: aurum、argentums、cuprum、aluminum and so on. It also process acrylic and PC board.
8、Q: Is it heavy? Re: Only 4.5kg.
9、Q: Is it safe? Re: It has no dangerous, because it use D.C.14.5V. The saw has the special stroke design, you can't be hurt even if you finger touch the operating saw blade. Driller, wood lathe, metal lathe are basically not injured hand, but you still must be careful when operating the machines.
10、Q: Where to buy the materials of processing samples? Re: You can buy them from general city of building materials, model shop, hardware store and DIY shop, you also can buy from our company.
11、Q: Does the UNION-1 need maintenance? Re: Please clean up the machine and keep dryness, needn't to use any special lubricants.
12、Q: Are the spare parts of expendable expensive? Re: No, we offer the cost price only.
13、Q: Do motor belt easily damage? Re: Adopt strong fiberglass rubber, it's very coriaceous. As long as it is not hurt by scissors or razor blades, it ensure have longer life than motor.
14、Q: Is there any differences in direction of motor rotation when we using DC? Re: Because the transformer in our products has directional control, you needn't worry about this problem when using the original transformer. But please pay attention to the polarity and direction of rotation when using general transformer, and also pay attention to the specifications of voltage and current, it must be DC.14.5V 2A..
15、Q: Do the sliding parts of machine accessory need adding lubricants? Re: Yes, but do not use the general lubricants to prevent flowing liquid pollution, please buy "Vaseline" poultice in pharmacies, and use the brush which do art design to smear lubricants.
16、Q: How long do the machines sustaining use? Re: The D.C motor can be sustaining used for 300 hours theoretically. However, we advise to shutdown at any moment. In order to save electricity and increase the frequency of using and life-span.
17、Q: How big the hole can driller dig? Re: The standard equipped with collet of 1mm-6mm, it can also use the collet of three or four claws, fixed the big aiguille can be achieved 26mm.
18、Q: What and how many cutters are included in Union 6 in 1? Re: There are 12 saw blades, 1 turning gouge, 1 lathe tool, 1 milling cutter and 1 drilling(2 mm).
19、Q: How to drill hole when the object is too heavy or too deep to be placed on the machine? Re: We can remove aiguille group from the base, mark the place on the drilling materials and use the aiguille group as hand drill.
20、Q: How to find the center of things by wood lathe? Re: Round log: To find the center by the attached center localizer. Quadrate log: Use the diagonal, junction is center.
21、Q: How to deal with a blunt tool of wood lathe? Re: We can use the grinding wheel burnish lightly, we can also use steel stick burnish various forms as processing tools.
22、Q: Can all the wood be made? Re: Hardwood and cork all can.
23、Q: How thick the materials can be sawn by saw? Re: The wood under 7.0mm all can be sawn, aluminous board、cupreous board、PC board under 1.2mm, and acrylic sheet under 2.0mm.
24、Q: Can materials above 7.0mm be sawn? Re: Yes, but it depends materials and must add other fixed fittings.
25、Q: How long can the jigsaw work continuously? Re: For the wheel box of the jigsaw is easy be heated, we advise not to work continuously more than 1 hour. Insure the cleanness and cooling down.
26、Q: Why do the saw not hurt hand? Re: Because the saw has the special stroke design, the stroke is only 4mm, it can cut the hard object, but the hand is soft, stretchy and can absorb the stroke, it not hurt hand.
27、Q: Which parts are expendable? Re: (1) belt (2) lathe tool (3) drilling (4) milling cutter (5) saw blade (6) jigsaw wheel box (7) screw (8) motor fan (9) plastic cutter clamp
28、Q: Can it do thread? Re: Thread must be done by special machine basically, this style is not suit to do thread. Union 1 6in1 Mini Multipurpose Machine
Item Price: $225.00
|
